| 07-11-5 |
Sikorsky |
Perform ultrasonic inspection of the M/R shaft for cracking as specified | S-76A,B,C |
| 07-11-21 |
Diamond |
Inspect/replace universal joints between fuel selector and fuel valve as specified | DA40 |
| 07-11-2 |
Enstrom |
Inspect main rotor push-pull control rod as specified | F-28A/C/F, 280/C/F/FX, 480B |
| 07-11-19 |
Moravan |
Modify the Limitations section of the AFM as specified | Z242L |
| 07-11-17 |
Cessna |
Inspect proper wiring of engine fire extinguishing bottles | 500,501,550,551,S550,506,560XL,750 |
| 07-11-14 |
Embraer |
Replace fuel level control units 1 and 2 as specified | EMB-135BJ |
| 07-11-1 |
Robinson |
Replace seat belt buckle as specified | R44 and R44II |
| 07-10-7 |
Turbomeca |
Supersedes 06-21-10 | Inspect high-pressure pump drive gear shaft and assemblies as specified | Arriel 2B series |
| 07-10-6 |
Turbomeca |
Modify the digital electronic unit (DECU) by downloading the TU144C software version 5.02 as specified | Arriel 2B1 series |
| 07-10-15 |
Cessna |
Supersedes 06-6-6 | Revise POH/AFM icing equipment as specified | 208/B |
| 07-10-11 |
Embraer |
Replace electrical bonding clamps in fuel tanks as specified | EMB-135BJ |
| 07-10-1 |
Air Tractor |
Inspect horizontal stabilizer brace tube assemblies for cracks and replace as specified | AT-602 |
| 07-1-6 |
Bell |
Supersedes 04-24-8 | Inspect tail rotor as specified | 206A, B, L, L-1, L-4 |
| 07-1-4 |
Turbomeca |
Inspect fuel pipe as specified | Artouste series |
| 07-1-12 |
Dassault |
Inspect the identification plates of the outboard slats and do all investigative/corrective actions as specified | Falcon 50, 900, 900EX, 2000, 2000EX |
| 06-9-4 |
Dassault |
Inspect engine mounts as specified | 900EX |
| 06-9-13 |
Honeywell Engine |
Inspect 3rd stage turbine disk as specified |ALF series |
| 06-9-10 |
Eurocopter |
Superseded by 07-25-8 |
| 06-8-9 |
Air Tractor |
Superseded by 10-13-8 |
| 06-8-8 |
Air Tractor |
Inspect wing spar caps as specified | select 400 series |
