| 02-19-2 |
Turbomeca |
Visually inspect exhaust pipes for cracks and leaks with focus on ejector assembies to exhaust as specified | 1A series |
| 02-19-10 |
Air Tractor |
Superseded by 04-15-15 |
| 02-19-1 |
Socata |
Perform test of pilot right hand station control wheels for jamming; adjust control stop | 700 |
| 02-18-6 |
Eurcopter |
Supersedes 98-6-4 | Inspect each tail rotor gearbox for play between splines of gearbox bevel gear and rotor drive shaft | 330,332 |
| 02-18-51 |
(WSK) PZL |
Superseded by 03-5-1 |
| 02-18-5 |
Eurocopter |
Inspect radial play and rotation torque of tail rotor blade de-icing rotating collector | 330, 332 |
| 02-17-53 |
Lycoming Engine |
Superseded by 02-19-3 |
| 02-17-51 |
Agusta |
Superseded by 02-25-51 |
| 02-17-3 |
Bell Helicopter |
Perform fuel filter cap shimmiming and electrical bonding procedure as specified | 407 |
| 02-17-1 |
Lear |
Pull Foot Warm circuit breaker on co-pilot's panel and install collar on specified circuit | 45 |
| 02-16-7 |
Bombardier-Rotax |
Replace valve spring retainers as specified | 912 series |
| 02-16-26 |
Bombardier - Rotax |
Inspect engine crankcase for cracks as specified | 912F,914F |
| 02-16-25 |
Turbomeca |
Perform daily inspection of floor of helicopter engine bay for fuel leaks; repair as specified | 2 series |
| 02-15-8 |
Eurocopter |
Measure cargo hook clearance as specified; remove as required | EC120, 330,332,355&365 series |
| 02-15-7 |
MD Helicopter |
Create component history for each lateral-mixer bellcrank assembly; replace as specified | MD900 |
| 02-15-6 |
Air Tractor |
Replace rudder control cables and fairlead as specified | 802/A |
| 02-15-51 |
Sikorsky |
Review blade service records for damage from lightening strike; replace as specified | S76 series |
| 02-15-5 |
Turbomeca |
Superseded by 08-8-16 |
| 02-15-4 |
Honeywell Int |
Ammend life cycle limit of centrifugal compressor impleller as specified |T53 series |
| 02-15-2 |
Hamilton Sunstrand |
Replace APU compressor wheels as specified | Fairchild 227, Falcon 20, Raytheon 600,700&800,Sabreliner 60 |
