| 00-5-11 |
Eurocopter |
Replace each tail rotor blade as specified | SA 315B, 316B |
| 00-4-5 |
IAI |
Inspect and measure countersink angle of bolt holes and bolts in lower scissors fitting of horizontal stabalizer as specified | 1125 |
| 00-4-25 |
Bell |
Modify door latch rod assembly | 407 |
| 00-4-20 |
Bell |
Replace hydraulic relief valve as specified | 407 |
| 00-4-19 |
Dassault |
Supersedes 97-21-16 | Revise AFM to reflect new N1 speed limitations during icing conditions | 50 |
| 00-4-15 |
Bell |
Inspect all drive pins for looseness or damage | 222 |
| 00-4-10 |
Hoffmann Propeller |
Remove and replace propeller mounting bolts as specified | Various Lyc O-360,O-540, & Cont O-470 engines |
| 00-4-1 |
Cessna |
Superseded by 13-11-11 |
| 00-3-9 |
Cessna |
Supersedes 96-24-6 | Revise AFM on operation in actual or expected icing conditions | Citation V |
| 00-3-19 |
Piaggio |
Revise AFM as specified on operation of deicing boots | P180 |
| 00-3-18 |
Partenavia |
Revise AFM as specified on operation of deicing boots | AP68TP |
| 00-3-17 |
Fairchild |
Superseded by 07-16-3 |
| 00-26-6 |
Eurocopter |
Replace main rotor blade tension-torsion strap as specified; create log, review history | BK-117 |
| 00-26-20 |
Gulfstream |
Modify wiring in pilot & co-pilot junction boxes, auxiliary power relay box, power distribution box and master caution panel as specified | G-III |
| 00-26-19 |
Socata |
Inspect for a low point in fuel tank air vent valve hose; reroute hose if detected | TBM 700 |
| 00-26-17 |
Pilatus |
Revise POH windshield hearter operation; modify windshield deicing system wires and circuit breakers | PC-12 |
| 00-26-16 |
Raytheon |
Inspect for missing rivets above right wing and below cabin door threshold | A36,B36TC,58 |
| 00-26-12 |
Eurocopter |
Inspect hydraulic line shielding hose as specified | EC135 |
| 00-25-9 |
Agusta |
Inspect engine exhaust ejector to ejector saddle locking system and components as specified | A109E |
| 00-25-8 |
Eurocopter |
Supersedes 00-10-10 | Perform visual or dye-penetrant inspection of cross beams for cracks as specified | 350,355,355N |
